100% Acrylic Interior Wall Paint Smooth Emulsion with Silicon Additives
Zhuoan Interior Wall Paint is a revolutionary paint, with a unique formula of ceramic microspheres and advanced stain resistant technologies that surpasses the performance of traditional interior acrylic paints.
Its unique blend of rheology modifiers improves flow and levelling, along with outstanding hide, increased durability, stain resistance and quick-drying characteristics, results in superb application.
FEATURES & BENEFITS:
-
Excellent Flow & Brushability
-
Low VOC and No Odour
-
Good Sheen
-
Rich Smooth Finish
-
Excellent Washability
-
Excellent Stain Resistance
-
Excellent Fungal Resistance
-
Antibacterial
PRODUCT PARAMETER:
| Sheen level | 3 - 12 at 60 deg GH |
| Stability of thinned paint | To be used within 24 hours |
| Flash point IS101/1987 Part 1, Sec 6 | NA |
| Wet Film thickness | 150UM |
| Dry Film thickness | 50UM |
| Surface Drying Time | 5min |
| Hard Drying Time | within 1hrs |
INTENDED USES:
Suited for home, office, commercial or industrial environments.
Cleaning
To avoid cleaning out brushes and rollers in the middle of a job using alkyd paints, wrap them in aluminum foil (to prevent the solvent from evaporating) overnight.
When you've finished painting
Brushes should be stored flat or on their handles. Standing them on their ends will bend the bristles and spoil them.To reseal a can of paint so that it is airtight, wipe the rim of the can clean, replace the lid, place a block of wood over the top and tap it down with a hammer. Then quickly invert the securely lidded can to form an airtight seal which will help prevent skinning.
Handling paint and chemicals
Only buy as much paint as you need for the job in hand. If you do need to store it, out of the reach of children.Don't throw away your white spirit after use. Allow it to stand and the sediment will fall to the bottom. Then pour off the clean spirit and re-use it. Don't pour paint or white spirit down the drain as the chemicals they contain can disperse and contaminate the water supply.
Health and Safety
Even though paint products are safe and easy to use these days, many contain chemicals that can be harmful if incorrectly used. A few simple precautions will ensure that good results are obtained safely.
Always read the label and instructions for the use of paints, thinners and other decorating materials before you begin work.
Wear gloves if you have sensitive skin and always wear suitable eye protection when decorating.
Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
When applying solvent-based paints you should use them in well ventilated areas. Ensure maximum ventilation during both application and drying. Do not use on large surface areas inside such as walls and ceilings (always use Water-Based paints for this), or in confined spaces.
Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
Packaging & Storage:
Package
Barrel,
20kg/barrel
Storage:
Paints should be stored in dry, shaded conditions and must be protected from freezing at all times during storage and transport. Frozen material shall be discarded, and never thawed and applied. The recommended storage temperature is between 5ºC (41ºF) and 30ºC (86ºF). Containers should remain sealed and unopened until needed and used in date order. Shelf life may be reduced at higher storage temperatures.
INTERIOR PAINTS PAINTING PROCESS
-Surface Preparation
STEP #1
Rub the surface using a suitable abrasive paper and wipe it off to ensure that the surface is clean, dry and free from dirt, grease, wax or any other defective or poorly adhering material.
STEP #2
Apply a coat of Nerolac Cement Primer ** (water thinnable) followed by Nerolac Wall Putty**/ Nerolac Cement Putty** (wherever required) to level and smoothen the surface.
STEP #3
Sand the surface with emery paper 220 and wipe clean.
STEP #4
Apply another coat of primer on puttied areas.
STEP #5
Sand the surface with emery paper 320 and clean the surface with cloth before painting.
STEP #6
Finally, apply two to three coats of Nerolac Interior Emulsion as per recommended thinning. Dark shades may require additional coat for hiding.
